Spanish Fork, Utah County · ZIP 84660
Radon Mitigation in Spanish Fork, UT
Got a high radon test? We connect Spanish Fork homeowners with a licensed, NRPP/NRSB-certified local contractor for a free, no-obligation quote.
📞 Call (801) 898-9129Talk to a real person about your test result.
Radon and Spanish Fork homes
Spanish Fork sits at the mouth of Spanish Fork Canyon in south Utah County, where the Spanish Fork River runs toward Utah Lake. It has an established downtown, older neighborhoods with mature trees and fast-growing subdivisions to the south and west.
Housing ranges from older ramblers and split-levels near downtown to newer two-story homes with full basements. Split-level homes in particular can have more than one slab, which affects how a system is designed.
Spanish Fork tip: If your home is a split-level, an on-site assessment matters. Contractors can test whether one suction point reaches both slabs, which can affect whether you need one system or two.
Should you test your Spanish Fork home?
Yes. The Utah County Health Department says one out of three Utah homes has unsafe radon levels, and recommends testing at least every five years or after a remodel. The EPA radon zone map places Utah County in Zone 2 (moderate potential), but EPA is clear that the map can't predict any single home and that every home should be tested. Radon in Spanish Fork can differ from house to house, even on the same street.
Test the lowest level of your home that you use as living space. The colder months are the best time to test. You can order a discounted short-term kit through radon.utah.gov, or borrow a professional continuous monitor from the Utah County Health Department's Provo office from October through March for a small fee.
What your result means
- Below 4 pCi/L: below the EPA and Utah action level. Retest every two to five years.
- 4 to 6 pCi/L: Utah DEQ suggests a long-term test to confirm.
- Above 4 pCi/L: EPA and Utah suggest mitigation. Contact a certified professional.
How radon mitigation works in Spanish Fork
According to Utah DEQ, a typical system uses a roughly five-inch hole in the foundation, four-inch PVC pipe and an exhaust fan outside or in the attic to pull radon from under the home and vent it away. DEQ estimates the cost at around $2,000, plus about $8 to $10 a month in electricity, with a fan replacement after about 15 years. Get a retest after the system has run for at least 24 hours, and check the manometer gauge regularly. See our radon mitigation cost guide for what changes the price.
Choosing a contractor
Utah requires mitigation to be done by a licensed contractor with NRPP or NRSB certification. Utah DEQ suggests getting three bids and looking for diagnostic testing, a warning device, a post-install retest and a written guarantee to reach 4 pCi/L or below. When you request a quote, we pass it to an independent, licensed, certified contractor who serves Spanish Fork.
Nearby service areas
We also connect homeowners near Spanish Fork in Springville, Salem, Mapleton, Payson. See all Utah County service areas.
Spanish Fork radon FAQ
We have a split-level in Spanish Fork. Will we need two systems?
Not necessarily. An on-site diagnostic test can show whether one system can reach both slabs.
What's the first step if we've never tested?
Test the lowest lived-in level. Utah DEQ offers discounted kits through radon.utah.gov.
How long until we know the system worked?
Utah DEQ advises retesting after the system has been running for at least 24 hours.
How much does radon mitigation cost in Spanish Fork?
Utah DEQ says a system should cost around $2,000, and price depends on the home's size, foundation and layout rather than the city. See our cost guide for details.
Who can install a radon system in Spanish Fork?
Utah requires a licensed contractor with NRPP or NRSB certification. A handyman registration does not qualify.